ALIGNMENT SYSTEM

Align and secure your vending machine with Graphics That Pop Alignment Systems. It uses a variety of brackets to align and secure your machines. This keeps your bank of equipment looking neat and organized without much effort. Space your machines evenly apart and space the fronts of your machines at equal distance from the wall without damaging them.

Vending machines do not come cheap and the last thing you want to do is leave them to be damaged over time. Cut down on service calls by using our Alignment Systems that will turn individual machines into one single unit that can’t be pushed, moved, or shaken. They also reduce damage to floors and walls and are only fastened on the top of machines to keep your sides looking new. Buy Graphics That Pop Alignment Systems with confidence. These high quality brackets have a long history of reliability and effectiveness. Thanks to their simple design, these brackets can be used on or around any vending machine. Each bracket includes self-tapping screws at no extra cost. Contact us and purchase some today!

Alignment Systems Brackets:

1.0″ Spacer Bracket

1.0” Spacer Brackets are used to evenly align and space your vending machines. They secure your machines to one another and make it difficult to shake them while providing great ventilation. This is especially important with refrigerated units. This bracket is 5″x5″ and is fastened with self-tapping screws (included) from the top of the machine.

 

1.5″ Spacer Bracket

1.5” Spacer Brackets are used to evenly align and space your vending machines. They secure your machines to one another and make it difficult to shake them while providing great ventilation. This is especially important with refrigerated units. This bracket is 5″x5″ and is fastened with self-tapping screws (included) from the top of the machine.

 

Standoff Bracket

Standoff Brackets are used to align the fronts of your vending machines evenly and at equal distance from the back wall. This bracket can be used on any machine regardless of its depth. Because it is spaced up against the wall, you cannot push or shake the machine. This bracket is 3″x3″x21″ and is fastened with self-tapping screws (included) from the top of the machine.

 

90º Angle Bracket

This 90º Angle Bracket is used to secure machines of different heights together where a Spacer bracket or flat bracket will not work. This bracket is fastened with self-tapping screws (included) from the top of the shorter machine and into the side of the taller machine.

 

12″ Flat Bracket

The 12″x12″ Flat Bracket is used to align vending machines when bridging a large gap is required. It secures two machines or other units of equal height together. This bracket is great for the use with vending machine that have large doors like some older Vendo units. It is fastened with self-tapping screws (included) from the top of the machine.

 

1.0″-90º Spacer Bracket

The 90º-1.0” Spacer Bracket is a combination of the regular spacer brackets and the 90º Angle Bracket. It is used to secure machines of different heights together, while providing ventilation between these machines. It is fastened with self-tapping screws (included) from the top of the shorter machine and into the side of the taller machine.

 

1.5″-90º Spacer Bracket

The 90º-1.5” Spacer Bracket is a combination of the regular spacer brackets and the 90º Angle Bracket. It is used to secure machines of different heights together, while providing ventilation between these machines. It is fastened with self-tapping screws (included) from the top of the shorter machine and into the side of the taller machine.